來源：http://www.tjjindeli.com 發布時間：2022-07-14 20:13:47
Many times, carelessness may cause the cost-effectiveness of color coated aluminum roll and the deformation of product surface, so we need to avoid these problems when using color coated aluminum roll? If you don't know, you should have a good look.
1. If funds are to be invested in application, the temperature should not be over temperature or too cold under all normal temperatures. If it is a flat roof, the height width ratio should not be less than 10 degrees.
2. Before the equipment, immediately carry out the inquiry to ensure that the raw materials of the flat roof are free of wear and tear, and ensure that they can be used normally, and ensure the service life of the application under all normal conditions.
3. The anchor bolt heads of fixed colorful aluminum coils should be sealed with chemicals with strong moisture resistance to prevent precipitation from entering into corrosion.
4. The natural ambient temperature of colorful aluminum coil processing should be above 7 ℃, and the gap of the processing roll system should be adjusted according to the thickness of colorful aluminum coil, and the dirt on the roll surface and backing plate should be eliminated; In addition, you should check whether the paint falls off on both sides of the colorful aluminum coil. If the paint falls off, you should find out the cause and listen to the opinions and Countermeasures before continuous processing.
Avoid problems in installation and use of color coated aluminum roll
1. Check immediately before installation to ensure that the raw materials of the flat roof are free of wear and tear, that everything is normally used and that everything has a normal service life.
2. If it is to be delivered for use, it should be in the normal temperature state. The temperature should not be over temperature or too cold. If it is a flat roof, the temperature should not be less than 10 degrees
3. The natural ambient temperature of color coated aluminum coil processing should be above 7 ℃. The gap of the processing roll system should be adjusted according to the thickness of the color coated aluminum roll, and the dirt on the roll surface and support column should be eliminated. In addition, check whether the paint on both sides of the color coated aluminum roll falls off. If the paint falls off, the reason should be found out and effective measures should be taken, and then it should be processed again.
4. Waterproof coating shall be selected for the sealing head of aluminum to prevent the corrosion of anchor bolts.
5. In order to ensure the construction quality of color coated aluminum coils, aluminum coil manufacturers must strictly carry out installation in accordance with the said standards.
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.tjjindeli.com , our staff will contact you in time.